⚡The strongest rotary cutting teeth on the surface! Revealing the entire manufacturing process of "diamond drills" in mining engineering⚡
---
###💎 Core Materials: Hardcore CP combination
**Tooth body material**：
42CrMo/30CrMnTi alloy steel 💪
Hardness range: HR48-52 (after quenching) | HRC43-47 (after tempering)
👉 The "skeletal system", equivalent to teeth, is the ultimate impact-resistant force!
**Alloy formula**：
🔹 Tungsten powder (W) → hardness bearing (hardness comparable to diamond!)
🔹 Cobalt (Co) → Toughness King (flexural strength increased by 30%+)
💡 The golden ratio is customizable! Different strata match different formulas:
- Soft rock strata → Cobalt content ↑
- Hard rock strata → Tungsten content ↑
### 🏭 PRODUCTION PROCESS full process (clamp welding integrated production line)
1️ ** Tooth formation **
Youdaoplaceholder0 Precision forging +CNC machining → error ≤0.05mm!
▸ Surface treatment: Sandblasting for rust removal → as bright as mirror ✨
2️ Flux coating
Youdaoplaceholder0 Exclusive formula brazing agent → alloy welding strength ↑50%
(Close-up of flux application 🎯)
3️ Quenching process
🌡️ Cool to -196 ° C instantly!
➤ Hardness is directly maximized → Wear resistance is enhanced by 3 times!
4️ Tempering treatment
🔥 200-600 ° C precision control (different models may vary) :
| Temperature range | Characteristic variation |
|----------|----------|
| 200-300℃ | Maintain hardness + relieve stress |
| 400-600℃ | Toughness significantly improved |
5️ ** Ultimate polishing **
💎 Mirror finish → friction coefficient reduced by 15%!
### ⚡ WHY CHOOSE OUR HOME?
✅ ** Formation Customization Expert ** : Develop custom formulations for 18 formations including granite/shale/sandstone
✅ ** Life King ** : Measured working life is 40%+ over competing products (with mine measured comparison chart 📈)
✅ ** Intelligent production line ** : Fully automatic temperature control system ±1℃ accuracy
### 💬 Real feedback from users
"After CHANGING THE picks of THIS HOUSE, drilling SPEED took OFF directly 🛫! The teeth that used to be replaced every two days can now be used every five days! -- Mr. Wang from Shanxi Coal Mine
The customized high-cobalt formula performs exceptionally well in the clay layer, so there's no need to worry about the knife sticking anymore! "" -- Sichuan Tunnel Project Department
🔍 ** Did you know ** : The Angle of the alloy head of the picks affects drilling efficiency directly! Our home offers a full range of Angle customization from 15° to 45°
# Construction Machinery # Mining Equipment # Hardcore Manufacturing # Rotary Drilling RIGS # Made in China
> 💌 Click the home page for more process videos! Next issue preview: "Guide to Failure Analysis of Rotary Cutters" 🔧
